This portion of owners manual is a supplement to the Bicycle owner’s manual. This section pertains
to the features in the electric bicycle and how to care for them.
INSTALLATION INSTRUCTIONS
1.
Unpack the bicycle from the box and cut all the ties that held the bicycle together during
shipping.
2.
Insert the head set cover/cable guide piece onto the handlebar stem, and handlebar stem onto
the Head tube. Align the handlebar such that it is 90 degrees to the front wheel and then
tighten the screw with the supplied Allen key.
3.
Remove the battery from the rack, so that it is easier to turn the bicycle upside down to install
the front wheel. To remove the battery, use the large keys insert them into the bottom key hole
and turn the key clockwise to release the latch holding the battery. While the key is turned,
gently slide the battery from the holder.
4.
! WARNING: Please make sure that the saddle and the handle bar are installed properly
before turning the bicycle upside down to install the front wheel. Ensure the weight of the bike
does not bend the rear mudguard.
5.
Turn the bicycle upside down such that the fork is facing upward.
6.
Check the pattern of the tire such that when installed they will match the direction of the rear
tires.
7.
Install the Quick Release lever onto the front wheel with the lever on the same side as the Disc
Brake.
2
