OPERATION INSTRUCTIONS
How to operate the Electric Bicycle
The Electric bicycle can be operated in 3 different modes:
1. Manual Mode –
Make sure the Display on the bike is “OFF” and then, pedal the bicycle normally as you
would any bicycle.
2a. Pedal Assist Level 1 –
Turn on the battery power to the electric bike by turning the key clockwise to the “ON”
position.
Press and hold “MODE” button on the pad located to the left of the handlebar to turn “ON”
the system. Pedal the bicycle normally as you would any bicycle.
The motor will stop if the brake lever is depressed even if you are still peddling the bicycle.
The motor will stop when you stop peddling in this mode.
When first switched “ON” the motor starts off in the “Level 1”.
In this mode the motor is very power efficient, and will assist you with the least power as
you pedal.
In “Level 1”, the system provides you with the most “miles per charge” of battery power use
among the pedal assist modes.
2b.Pedal Assist Mode Level 2 –
To put the bike in PAS “Level 2” pedal assist mode, switch “ON” the bike by pressing and
holding the “MODE” button on the Pad located to the left of the handlebar and then press
“UP” button on the pad until “2” appears on the LCD screen. Pedal the bicycle normally as
you would any bicycle.
In PAS “Level 2” the motor will assist you with a moderate amount of power as you pedal
the bicycle.
The motor will stop if the brake lever is depressed even if you are still peddling the bicycle.
The motor will stop when you stop peddling in this mode.
This mode will give you a balanced “miles per charge” of battery power use among the
pedal assist modes.
2c. Pedal Assist Mode Level 3 –
To put the bike in PAS “Level 3” pedal assist mode, switch “ON” the bike by pressing and
holding the “MODE” button on the Pad located to the left of the handlebar and then press
“UP” button on the pad until “3” appears on the LCD screen. Pedal the bicycle normally as
you would any bicycle.
In this mode, the motor will assist you with a high amount of power as you pedal the
bicycle.
! CAUTION: This mode is designed to achieve a speed of 20 MPH. User discretion is
advised
The motor will stop if the brake lever is depressed even if you are still peddling the bicycle.
The motor will stop when you stop peddling in this mode.
This mode will give you a low “miles per charge” of battery power use among the pedal
assist modes.
2d.Pedal Assist and Throttle on demand (PAS Level 0)–
3
