9
Electric Motor and Battery Features
High efficiency and power saving Electric Motor–
•
A Brushless Motor with gears
•
High efficiency of up to 85%.
•
Efficiency>80%. 48v battery for a continuous run range of more than 40 miles on a single
charge in pedal assist mode.
•
Produces a continuous and sustained power of 750 Watt power with a peak of up to 1500
Watts.
High power and high torque –
•
Fast pick up even under heavy load. Easily climb and ascend steep inclines.
•
Low power consumption, Long-battery life and a Compact design.
•
The 48 volt Battery pack weighs 12 Lbs.
Trouble-free, Low maintenance, Long life span and Easy to maintain electric motor –
•
High Quality Brushless Electric Disc motor with an advance cadence sensor and gears.
•
Closed system motor requires only surface cleaning and dry storage.
Charging the Battery
•
Connect the Charger to the wall outlet first before connecting the Charger to the Battery.
•
Ensure the Charger is firmly plugged into the Wall outlet.
•
Ensure the Charger output terminal and the Battery input terminal are firmly mated to
each other.
•
When the charger is plugged into a wall outlet, the charger LED indicator will turn solid
RED to indicate that the battery is charging.
•
The Charger LED indicator will turn GREEN when the battery is fully charged.
•
Disconnect the charger from the wall outlet before disconnecting the charger from the
battery.
•
To ensure long battery life, fully charge the battery for at least twelve (12) hours during
the first initial three charges and fully charge the battery at least once every 2 months
•
! NOTE: Only charge the battery pack using the supplied charger.
•
! NOTE: Always plug the charger onto the Battery pack before plugging the charger to the
wall socket.
•
! WARNING: Do NOT leave the charger plugged into the wall out let charging the battery
for more than 24hrs at a time for risk of damaging the battery.
Repair and Service
！
WARNING:
•
Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or
adjustments, as necessary, can result in injury to the rider or to others. Make sure all
parts are correctly assembled and adjusted as written in the owner’s manual.
•
Immediately replace any damaged, missing, or worn parts.
•
Make sure all fasteners are correctly tightened as written in the owner’s manual
•
Parts that are not properly tightened can be lost or operate poorly.
•
Do not over tighten parts, as over-tightening may damage the part.
