1.
Mains inlet
2.
Fuse
3.
DMX inlet
4.
DMX Oulet
5.
Remote Control inlet
6.
LCD Display
7.
Smoke Fluid Tank
8.
Remote Control
9.
Wireless remote
10.
LED Indicators heating/low fog
OPERATION:
1.
Fill the machine with a smoke fluid (7) (use Visage DJ mix Fluid)
2.
Plug in the mains lead (1) and switch on (2), the machine will take approximate-
ly 5 minutes to reach operational temperature.
3.
Plug in the remote control (9) into the socket on the rear of the machine (5).
4.
The LED on the remote (9) will illuminate red while the machine is heating,
when the LED turns green the machine is ready for operation.
5.
To operate the machine simply press the button on the remote (9), the machine
will then blast a smoke.
6.
It is recommended to press the button in blasts for the best effect. After 30 sec-
onds the machine must be given time to reheat. The LED on the remote will turn
back red when the unit requires reheating.
7.
Alternatively you can simply press the Burst button on the rear of the machine
to manually operate.
8.
To operate via DMX, press FUNCTION key until display says DMX set the ad-
dress using up/down buttons. (uses one channel of DMX).
9.
The FUNCTION key allows access to the programs, including the INTERVAL
and DURATION, allowing you to set the time in seconds between bursts and
how long the bursts using the up/down keys.
EFX
(Entertainment FX)
1.
2.
3.
4.
5.
6.
7.
9.
8.
