−
SAFETY PRECAUTIONS:
1. Keep this product and its charging cable away from
excessive heat.
2. Do not operate this device with a damaged cable or after
it has malfunctioned or has been damaged in any manner.
3. Do not disassemble this product.
TECHNICAL SPECIFICATIONS:
General Headset Features
Standard
Bluetooth Specification V5.0
Bluetooth
®
Headset Profile
Support
Bluetooth
®
Hands Free Profile Support
Bluetooth
®
A2DP Profile
Support
Bluetooth
®
AVRCP Profile
Support
Support TWS
Support
Theoretical range in open field <10m without obstruction
Re-program the firmware
None
Battery
3.7V, 60mAh Lithium
polymer Battery (type)
Stand By (Paired mode)
5.5 days
Talk Time
6 hours
Battery Charging Case
500mAh
Charging time < 3.5 hours
OVERVIEW DIAGRAM:
Charging Contact
Charging Contact
Input Port
Micro USB
Charging Pod
HOW TO USE/GENERAL FUNCTIONS:
Desired Result
Required Action
Power On
Simply remove earphones from the
Charging Pod, if the earbuds are off, press
the L/R MFB for 2 seconds to turn back
on, the earphone will automatically go into
pairing mode.
Power Off
Place earphones into the Charging Pod or
press and hold for 5 seconds.
Pairing
1. Activate the Bluetooth
®
function on our
device and select EFM Pelion.
The earbuds will automatically pair with
the device.
2. Press the ‘YES’ soft key on the phone
to connect to the headset, pairing is
successful.
3. Earphones distance range up to
10 metre and working range is 180
seconds.
Play / Pause
Single click the R/L Multi-Function Button.
Next Track
Long Press R MFB for 2 seconds
Previous Track
Long Press L MFB for 2 seconds
Answer / End
Call
Single click MFB when call is incoming.
Transfer Call
Voice
To transfer call during call mode,
press & hold Multi-Function button for 2
seconds.
Voice Assistant Double Press the MFB button
Reject
Microphone Call
General Notes
Resetting
Earbuds
Press & Hold the Multi-Function button
for 2 seconds
• For Voice dial, your mobile phone must
support this function.
(check the mobile phone manual)
Make sure all Bluetooth fucntions is off,
turn off earbuds and press the MFB on
both earbuds for 10 seconds, white & red
LED will flash, once the resset is success a
white & red LED will repeated flash 5x.
CHARGING YOUR EARBUDS AND
CHARGING POD:
Fully charge the battery for 3-4 hours before using the
earbuds for the first time, or when they have been unused
for extended periods. The charging pod has a built-in Power
Bank and is charged along with the earbuds. You can charge
the earbuds by placing them into the charging pod without
connecting to a power outlet.
1. Place the earbuds into the charging pod, the LED
indicator on each earbud will be on when charging and
turn off when fully charged
2. Connect one side of the supplied cable to the charging
port of charging case and connect the other side to any
USB power source. The Charging Pod will indicate its
charging status by a flashing white light.
3. When the device is fully charged, the LED will stop
flashing.
CHARGING STATUS
Earphones
LED will be disappears when fully charged
Charging Pod
White LED light when fully charged
Microphone
LED Indicator
Left Multi-Function
Button (LMFB)
WEARING YOUR EARBUDS:
The earbuds come with comfortable silicone buds for your
everyday use. Try all the different size earbuds that are
provided in the package to find the best fit for your ears. You
can get the best audio quality when the earbuds seal your ear
canal.
NOTE: Your left and right ears may need different size earbuds.
Insert the earbuds with the earbuds directed towards your ear
canal. Twist gently until they fit comfortably and fell secure
in your ears.
CONNECTING EARBUDS TO YOUR PHONE:
1. Take earphone from the charging pod to enter pairing
mode.
2. Turn on Bluetooth
®
on your phone and select EFM Pelion
to pair with this earphone.
3. When the earphones are not on the charging box, and
earphones are power off. Press the MFB (multi-function
button) on both earphones for 2 seconds to turn on the
earphones. The earphones will automatically enter pairing
mode
4. After this earphone is successfully paired with your phone,
TWS can remember up to three Bluetooth devices. You
just need to repeat the above steps to pair with another
Bluetooth device. The earbuds will only automatically
connect with the last paired Bluetooth device.
AUTOMATIC CONNECTION:
Now you have properly set up your earbuds, they will connect
to your phone automatically from now on.
Auto Connect
Earphones are automatically
connected to your phone
when you pull them out of
the charging pod.
Auto Off
Earphones are turned off
automatically when you put
them into the charging pod.
