![background image](http://html.mh-extra.com/html/efka/ab600a5010/ab600a5010_operating-manual_2367397020.webp)
- AB600A5010
Instruction Manual
- 20 -
6.15.1 Set and Reset Operating Hours Counter
The number of hours has been reached (service necessary):
Press the
>>
key once
The operating hours counter is set to "0" and restarted.
The number of hours has not yet been reached:
Press the
>>
key three times
The operating hours counter is set also to "0" and
restarted.
A value in parameter 177 has been changed:
After displaying
rES ...,
when the
E
key is pressed again,
SEt
will then be displayed.
If the changed value is to be saved, press the
>>
key 3 times.
6.15.2 Total Operating Hours Display
In this service routine enabled using parameter
176
, the total number of operating hours is displayed.
The sequence of displayed values is as with parameter
177
.
The values can only be displayed, not varied. Therefore, letter symbols "rES" for "reset" and "SEt" for "set"
will not appear.
7
Functions
7.1 Softstart
Function
Parameters
Softstart On/Off
(SSt)
134
Functions:
After power on
At the beginning of a new seam
Speed pedal controlled and limited to (n6)
Lower speed of a parallel function prevailing (e. G. Stitch count)
Stitch counting synchronized to position 1
Suspension with pedal in position 0 (neutral)
Interruption by full heelback (position -2)
7.1.1 Softstart speed
Function
Parameters
Softstart speed
(n6)
115
7.1.2 Softstart stitches
Function
Parameters
Number of softstart stitches
(SSc)
100