6
KEY FUNCTIONS
MODE
: Press to select functions (TIME, COUNT, REPS/MIN, CALORIE)
or hold on for 3 seconds to reset all values.
FUNCTIONS
STOP:
When stop exercising
, “STOP” displays on LCD.
SCAN:
Automatically scan each function in sequence.
TIME:
Displays the total time of an exercise starts from 00:00 - 99:59.
COUNT:
Automatically accumulates the steps made during exercise
REPS/MIN:
Displays steps per minute during exercise.
CALORIES:
Counts the number of calories burned during an exercise from start to finish.
OPERATING INSTRUCTIONS
Auto ON/OFF
The meter will turn on when you press MODE or when you begin exercising. If there's no signal
for approximately 4 minutes, the meter will automatically turn off. When you are not exercising,
meter shows STOP.
Display
Meter always displays COUNT at the top.
The bottom of the meter can display REPS/MIN, TIME, or CALORIE. Press MODE to select which
function you want to display at the bottom. An arrow points to the function displayed.
SCAN
If arrow points to SCAN, then the meter will automatically display at the bottom of the meter in
the following sequence: REPS/MIN, TIME, and CALORIE. An arrow will point to the function
displayed.
Reset
Press and hold button for 3 seconds to reset all values.
BATTERY:
The meter uses one AAA battery, which is included. If there is a problem with the
display, try changing the battery first. Replacing the battery will reset all values. Dispose the old
battery according to your regional guidelines.
V 3
EXERCISE COMPUTER