Efitment B015, User Manual, Page: 8 / 14

8
NOTE: ADJUSTING THE SEAT SLIDER
When securing the Knob (No.28) , the handle
on Knob (No.28) may not have enough space
to turn (See drawing on right). If this
happens, the handle can be adjusted.
To adjust the handle, pull on the handle, turn
the handle to a position that is not blocked,
and release the handle. Repeat as needed. It
may take several adjustments to get the
handle to a position where it can be turned.
Step 5:
Insert Handlebar Post (No.7) into Main
Frame (No.1) . Set Handlebar Post (No.7) at
desired height. Insert L shape Knob (No.54)
and tighten to secure.
Step 6:
Remove 4 Screws (No.14) , 4 Spring Washers
(No.15) , 4 Washers (No.16) , from the
Handlebar Post (No.7) with an Allen Wrench
(No.78) .
Attach Handlebar (No.8) and Meter Bracket
(No.19) to the Handlebar Post (No.7) using 4
Screws (No.14) , 4 Spring Washers (No.15) , 4
Washers (No.16) that were removed.
Tighten and secure with an Allen Wrench
(No.78) .