Duramax 6.6L LBZ/LMM
DSP5 User Guide
- 20 -
www.efilive.com
Configure FlashScan/AutoCal
for BBX
There are a range of configuration files that must be installed on FlashScan and
AutoCal devices before the device can be used in standalone mode (BBX).
Follow these instructions to configure your FlashScan or AutoCal for BBX.
1. Connect your FlashScan or AutoCal to your PC.
2. Open the EFILive V8 Scan and Tune application.
3. Select the [F5: BBX] option in the left-hand pane.
Data Logging
To configure data logging;
1. Select the [F2: Scan] option in the left-hand pane.
2. Remove any unnecessary controller configurations to ensure capacity
restrictions are not exceeded.
3. Add your chosen controller(s) to your list;
a. Press the green '+' icon.
b. Right click on the Engine Controller box.
c. Navigate to Select E35A or E35B.
d. Select OK.
4. Click on the E35A or E35B controller in the
“BBL Enabled Controllers” window.
