EFI Kyocera 17, Configuration And Setup

Page: 29 / 65

Password
The PS-17 uses this information to request authentication from an 802.1x authentication server.
Note:
This option is only available when Enable 802.1x Authentication on page 28 is selected.
Use ASCII code characters (63 characters maximum). It is possible to enter more, but the supported length is 63
characters maximum. Although you can enter characters other than ASCII code characters, only ASCII code
characters are guaranteed for authentication.
Validate Server Certificate
Select this option if you set
Select EAP Type
to
PEAP-MSCHAPv2
and want the PS-17 to use a trusted root certificate
when communicating with the authentication server. If you want the PS-17 to validate the server certificate, place
the certificate in the list of trusted certificates of the PS-17.
Note:
This option is only available when Enable 802.1x Authentication on page 28 is selected.
Menu tabs
There are tabs on the printer control panel that are specific to the PS-17.
Menu tabs provide many of the same controls available from Command WorkStation and allow you to view status
information, print system pages, and set up printing. For information about the job management features, see
Utilities .
Jobs tab
This tab provides access to jobs according to the status of the job, similar to the Active and Printed Jobs windows in
Command WorkStation.
Active Jobs currently waiting to print.
Held
Held jobs.
Printed Printed jobs.
Secure Print
Allows you to log on to display secure print jobs.
USB You can use this tab to print a file from a USB flash drive to one of the
published print connections.
To view a list, press the related tab. On each of these lists, you can press the arrow buttons to scroll up and down one
line at a time, or to advance to the top or bottom of the list.
On the
Active
,
Held
,
Printed
, and
Secure Print
tabs, you can print, print and hold (available on Active and Held tabs
only), or delete a job. You can also view the print properties for the job, where you can change the number of copies.
Other print properties cannot be changed at this point.
Configuration and Setup
Accessing PS-17 options through the printer control panel
29