18
Removing and replacing components
Interface board
C
AUTION
:
Make sure that you wear an ESD grounding wrist strap and follow standard
ESD precautions while handling Fiery X3eTY components.
The interface board connects directly to the extender card, which is connected directly to
the Fiery X3eTY motherboard (see Figure I, below, and Figure B on page 5).
F
IGURE
I
Interface board connections
Use the following procedures to remove or replace the interface board.
C
AUTION
:
Make sure that you wear an ESD grounding wrist strap and follow standard
ESD precautions while handling Fiery X3eTY components.
Rail
Interface board connected
to extender card
Extender card in PCI1
Screws to pan (2)
Pan
Jackscrew
(1 of 2)
