EFI Fiery ES IC-418, Configuration And Setup, Page: 121 / 243

Web Services for Devices printing
Web Services for Devices (WSD) allows printing from Windows 7 and later computers, and Windows 8 or later
based tablets.
The WSD option on the Fiery ES must be turned on in Setup. After Setup is complete, you can install the WSD
printer driver for the Fiery ES.
For information about configuring the settings in Setup on the Fiery ES, see
Configuration and Setup .
Install the WSD printer driver
You can install the WSD printer driver on Windows 7 and later computers, and Windows 8 or later based tablets.
1
Download the printer driver with WebTools.
For instructions on downloading the printer driver with WebTools, see
Download printer drivers with WebTools
on page 11.
2
In the
Fiery Driver Installer
dialog box, select the printer driver language and click
Next
.
3 Click
Next
in the
Welcome to the InstallShield Wizard for Fiery Driver Installer
dialog box.
4
Read the license agreement, click
I accept the terms of the license agreement
and click
Next
.
5
Select
Add a network, wireless or Bluetooth printer
.
6
Select the printer from the list of available printers and proceed to step 10 .
Note:
The WSD printer shows the Fiery ES with the printer in parentheses for the name of the printer.
If the printer is not listed, proceed to step 7 .
7
Click
The printer that I want isn’t listed
.
8
Click
Add a printer using TCP/IP address or host name
and click
Next
.
9
Select
Web Services Device
for
Device type
, type the IP address of the Fiery ES, and click
Next
.
Connection to the printer is initiated and the printer driver is installed.
10
Click
Next
and follow the on-screen instructions.
Do not share the printer and do not print a Test Page at this time.
Printing
Other Printing Methods
61