EFI E-46A, Installation And Service Manual

Page: 93 / 134

93 Installation and Service Guide: Color Controller E-46A
Performing Backup and Restore
To save the system configuration using Command WorkStation
1 Ask the site administrator to print the Job Log, Server Configuration page, and Font List (if possible).
2 Launch Command WorkStation and connect to the E-46A with Administrator privileges.
3 From the Server menu, click Backup and Restore .
4 In the Backup & Restore dialog box, click Backup > Next, and then select the items you want to back up, click Next .
5 Enter a file name and location, specify if you want to add the date to the file name, and then click Next .
6 Click Finish .
To save the system configuration using WebTools
1 Access Configure (see page 32 ).
2 On the left side, choose Fiery Server > Backup .
3 In the Backup dialog box, select the settings you want to back up.
4 Enter a file name and location, specify if you want to add the date to the file name, and then click Backup .
5 Click OK .
Restoring the system configuration
You can restore the system configuration of the E-46A to its previous state using a previously-saved system
configuration file. For more information about the system configuration file, see page 93 .
If you could not save a system configuration file, you must configure the E-46A settings. After you configure the
settings, the E-46A reboots. Ask the site administrator to restore any archived settings and files. For more information,
see Configuration and Setup , which is part of the user documentation set.
To restore the system configuration from Command WorkStation
1 Launch Command WorkStation and connect to the E-46A with Administrator privilege.
Note: The default password (Fiery.1) will be set after any of the following:
•
You re-install the system software
•
You restore the recovery partition (from Fiery System Restore)
2 From the Server menu, click Backup and Restore .
3 In the Backup & Restore dialog box, select Restore > Next, select the reference (.fbf ) file or the recent backup you
want restore and then click Next.
You can select the backup file using the Browse button, or you can select a recent backup.
4 Select the items you want to restore, and then click Next .
5 Click Finish .