manualshive.com logo in svg

EFI E-42B, Configuration And Setup

Share
Download
EFI E-42B Configuration And Setup Download Page 51

B

ACK

 

UP

 

AND

 R

ESTORE

 S

ETTINGS

51

B

ACK

 

UP

 

AND

 R

ESTORE

 S

ETTINGS

You can back up and restore selected settings or the entire E-42B configuration.

Backup/Restore

Use the Backup/Restore feature when the E-42B is operating normally and you want to apply 
groups of saved configuration settings to the E-42B. For more information, see 

page 51

.

Fiery System Restore

Use Fiery System Restore to recover from a system crash or hard disk failure. For more 
information, see 

page 52

.

Backup/Restore

Using the Backup/Restore feature in Configure, you can back up E-42B selected settings and 
restore them later, without reinstalling system software. When you back up settings, you save 
a configuration file with the settings.

You can back up and restore the following E-42B settings:

• Fiery system settings

• Color settings

• Scan settings

• FreeForm/VDP Resources

• Virtual printers

• Server presets

• Fonts

• Job  Log

For more information, see Configure Help.

You cannot use this feature to back up or restore the Paper Catalog database. For information 
about exporting the Paper Catalog database, see Command WorkStation Help.

Summary of Contents for E-42B













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands