S
ETTING
UP
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
37
Printing Protocol
LPD, IPP, Port 9100
Choose the protocol that the E-42B uses when using the Bonjour service. The list displays
only the protocols that you enable.
Default Queue
Jobs sent over Bonjour are sent to the default print connection for the selected protocol. For
example, if you choose LPD, jobs are sent to the connection that you chose for LPD jobs (see
on page 37). If no default connection is defined (such as for IPP), the
Print queue is used.
Print Setup
Windows Printing
Enable Windows Printing
Choose whether to enable Windows printing. For information about setting up a Windows
computer for Windows printing, see
Printing
and the documentation that accompanies
Windows
.
Windows printing runs via TCP/IP, so you must configure TCP/IP on all
computers that use Windows printing.
LPD & Port 9100
Enable LPD Printing
Choose whether to allow LPD printing.
Default LPD Queue
Print Queue, Hold Queue, Sequential Print,
virtual printers
Choose the default connection for LPD printing, if it is not set by the user.
Enable Port 9100
Choose whether to enable applications to open a TCP/IP socket to the E-42B at Port 9100 to
download a print job.
Default Port 9100 Queue
Direct Connection, Print Queue, Hold Queue, Sequential Print
Choose the E-42B print connection for downloading jobs to Port 9100. Only the print
connections you enable are available.
E-mail Printing
Enable E-mail Printing
Choose whether to enable the E-42B to use e-mail or Internet Fax to print PostScript, PDF, or
TIFF files or send files through e-mail or Internet Fax.
