UPS: OFFICE-RM 600 / 1000
Safety Instructions
OFFICE-RM Series
13
2.3
Prevention of personal injury / property damage
–
Please read this operating manual carefully to familiarize yourself
with the device. Under no circumstances should you ignore the
safety information.
–
Pay particular attention during the installation and initial operation of
the device.
–
Operate this product only in the proper and appropriate manner and
always within the mandated performance parameters (
Technical
Data).
–
Only perform maintenance and service work that is described in the
documentation. Observe the required steps. Only use original re-
placement parts from EFFEKTA Regeltechnik GmbH
2.4
Environmental protection
Send the product back to
EFFEKTA Regeltechnik GmbH
after the end of its
service life. We will ensure its environmentally friendly disposal.
2.5
Transport and Storage
The UPS may only be transported to the intended location in the original pack-
aging. The same applies to moves or returns.
The packaging has a very good device-specific protective function. However, all
devices damaged during transport must be checked by EFFEKTA Regeltechnik
GmbH before the initial operation. The same applies in general for any damages
to the device.
Should the device be in storage for more than 4 months, the battery bank of the
UPS device must be charged urgently.
Due to the possibility of existing energy storage (accumulators) within a UPS,
devices must generally be inspected by EFFEKTA Regeltechnik GmbH or a
qualified service center after transportation damages. In the case of transporta-
tion damages, there is a high risk that the energy storage units and/or their elec-
trical connections have been affected. As a result, short circuits and/or the leak-
ing of electrolytes cannot be ruled out. For this reason, the unit must be isolated
until an inspection has been performed.
In addition, the device should not be transported or stored upside-down.
