INSTANT SAVINGS
The
energy monitoring socket
uses real
time data to help you become more aware of
how much electricity an appliance is using.
With this knowledge you can make more
informed choices about what, when and
how to use the appliance according to your
energy saving objectives
HOW IT WORKS
The
energy monitoring socket
is a simple
plug-in device that sits between the
appliance and the wall socket. When you
plug in an appliance, the efergy energy
monitoring socket displays the consumption
of that appliance in watts and the cost per
year. You can also view the cost
accumulated so far and the cost per day by
pressing the
cost
button.
DIFFERENT MODES
The
energy monitoring socket
is flexible in
the way you can view data. Press the
cost
button to switch between cost settings, the
energy
button to switch between energy
settings, and you can change the time
setting by pressing the
up
button (see the
set-up instructions left).
CUMULATIVE DATA
The
energy monitoring socket
adds up
your energy data cumulatively so that you
can see how much energy you’ve used
since the appliance was switched on. Also
you can check how long the appliance has
been running for by pressing the
up
and
down
buttons.
Press and hold the
cost
button to enter set-up
You will then see the currency symbol flashing
Use
up
&
down
buttons to choose your currency. Press
cost
Use
up
&
down
buttons to choose
TARIFF 1
. Press
cost
Use
up
and
down
buttons to set the tariff cost
Press the
cost
button to move on to the next digit
Repeat the process until you have entered each digit
Press
cost
once more to exit
SINGLE TARIFF SET-UP
•
•
•
•
•
•
•
•
TIME
Seconds
Minutes
Hours
Days
COST
So Far
Per Day
Per Year
ENERGY
Watt (W)
Kilowatt Hours (kWh)
Voltage (V)
Current (A)
Frequency (Hz)
Power Factor (%)
Max. Watts (W)
Enter set-up as descibed above, but select
DUAL TARIFF
Use the
up
and
down
buttons to set tariff 1 start time
Press the
cost
button to move on to the next digit
Repeat the process to set tariff 2 start time. Press
cost
Again, use the same process to set tariff 1 & tariff 2 cost
Press
cost
to exit after setting cost details for both tariffs
Plug in the EMS product to start saving money and energy now
DUAL TARIFF SET-UP
•
•
•
•
•
•
•
TIME SET-UP
Press and hold
up
to enter set-up. Press
energy
to begin
Use
up
and
down
to set each digit. Press
energy
to confirm
Press
cost
to exit
•
•
•
