General Information
Installation
fully-closed refrigerating compressor and interior evaporator,
properly processed with a good cooling result, it is convenient
for use,quiet and saves on electricity.
The hard polyaminoester foam(made from spot high-pressured
foaming)is used for the thermal insulation which results in good
performance and durability.
-4-
-5-
Do not place the freezer in direct sun
The refrigerating system for this freezer is mainly composed of
a) embossed aluminium sheet, b) White coating aluminium sheet.
It results in a generally good, clean-looking, and durable unit.
The interior door case is non-poisonous and odorless,and formed
by easy-to -clean ABS plastic. It is made of a specially treated :
The cabinet and door are made of cold-rolled sheets
which have been bonderized and electrostatic-painted, is consistent
in thickness, corrosion-resistant, flexible and scratch-resistant.
The chest freezer should be placed
The unit must be level
on a flat and level surface. Leveling can
be obtained by adjusting screws on the
bottom of the unit
Proper air circulation
A space of approx 10cm is recommended
Also there should be minimum 100 cm.
Free space above the top. These points
are necessary for good air circulation
and door opening.
Avoid heat source
light or close to source of heat such
as a gas range or an electric cooker.
Avoid moisture and rain
Correct electricity voltage
Do not place the freezer close to the
sink or wash bowl as these areas have
high humidity and may cause condensation
on the freezer. Also avoid the rain.
Make sure that the input voltage is the
rated voltage which is specified in the
overloading of your domestic power
circuits.
Wiring diagram to prevent possible
To prevent voltage drop in the power
appliance from the same wall socket.
going to the chest freezer, plug straight
into a wall socket. Do not use any electrical
between the back of the freezer and the
wall .
Summary of Contents for EFCF 108EP
Page 1: ...User manual 1 9...
