
7. Next, push the slide tool in, to raise and release the trapped
wafer.
8. Pull the key tool out and position it to catch the next wafer. Pull
out slide tool out so the slot trap is on longer blocked.
8. Repeat the procedures 4 through 7 until you have read all the
wafers. Remember to read both sides of the lock by turning over
the tool. Please refer to the diagram below on wafer positions.
EEZ READERS
®
US Pat. No. 4,680,870
Canadian Pat. No. 1,278,930
Empty Boxes indicate where wafer is located.
7
6
5
4
3
2
1
IGNITION, DOOR, AND DECK
All cuts 1 - 7
(Trap Slot)
ˆ
Pointing
EEZ Y157
DOUBLE-SIDED
CHRYSLER