EET SOLAR STAND Manual Download Page 4

ENG

BOX 

CONTENT

After unpacking your package, please check whether all the components shown 

here are complete and undamaged:

• 2 metal brackets

• 8 screws

• 8 nuts

• 1 hex key

If all components have been delivered, you‘re good to go!

x8

IMPORTANT !!!

GENERAL AND 

SAFETY-RELATED INFORMATION

The installation and handling of your system is beyond the control of us, 

EET - 

Efficient Energy Technology GmbH

. Therefore, 

EET

 cannot be held responsible 

for  any  damage,  loss  or  expense  resulting  from  improper  installation,  improper 

product handling or misuse.

Make sure that the system is fastened tightly and that neither wind nor storm can 

have a negative effect. Consider that serious damage to property and personal 

injury can occur otherwise.

These instructions apply to the installation of a solar system using the metal 

brackets from 

EET

. It should be read carefully before use and kept close to hand 

for the life of the product.

The CE mark documents that the product satisfies the applicable requirements 

set out in the EU harmonization regulations. The product has been tested for 

compliance with standards up to 2000 meters above normal altitude.

Proper and safe operation of the system requires proper transport and storage, 

installation, assembly and careful operation. We assume no liability for damage 

caused by disregard of these instructions.

Please visit our homepage 

www.eet.energy/downloads

 and look at the 

operating  instructions  for  the  systems  and  their  components.  This  leaflet  is 

mainly to be seen as additional information to the other operating instructions. 

If you cannot find the right instructions or encounter any other ambiguities, please 

contact us on 

+43 316 23220333

DISMANTLING 

AND DISPOSAL

The same guidelines apply to disassembly as to assembly of the system. Should 

dismantling and/or a return be necessary, this may only be done in the original 

packaging and under the instructions of the 

EET

 staff.

We would like to point out that this product must not be disposed of with normal 

waste.  Improper  disposal  can  damage  the  environment.  You  can  find  more 

information on disposal on our website or simply contact us if the worst comes 

to the worst.

More information on our website: 

www.eet.energy

Summary of Contents for SOLAR STAND









Reviews: