EENOUR Mate 2 User Manual Download Page 4

To prevent injury to the user or other people and property damage, the following 

instructions must be followed. 

WARNING: This symbol indicates the possibility of death or serious injury. 

 

Installation must be performed according to the installation instructions. Improper installation may 
cause water leakage, electrical shock, or fire. 

 

Use only the included accessories and parts, and specified tools for the installation. Using non-
standard parts may cause water leakage, electrical shock, fire, and injury or property damage. 

 

Make sure that the power outlet you are using is grounded and has the appropriate voltage. The 
power  cord  is  equipped  with  a  three-prong  grounding  plug  to  protect  against  shock.  Voltage 
information can be found on the side of the unit. 

 

DO NOT modify the length of the power cord or use an extension cord to power this product. Do 
not share a single outlet with other electrical appliances. Improper power supply can cause fire or 
electrical shock. 

 

Install the air conditioner on a flat, sturdy surface. Fail to do so could result in damage or excessive 
noise and vibration. 

 

The air conditioner must be kept free from obstruction to ensure proper functioning and to mitigate 
safety hazards. 

 

DO NOT install your air conditioner in a wet room such as a bathroom or laundry room. Exposure 
to water can cause electrical components to short circuit.   

 

DO NOT install your air conditioner in a location where may be exposed to combustible gas, as this 
could cause fire. 

 

DO NOT operate a unit that has been dropped or damaged. 

 

Only use the included accessories and specified parts for installation. Using nonstandard parts may 
cause water leakage, electrical shock, fire and injury or property damage. 

 

DO NOT allow children to play with the air conditioner. Children must always be supervised around 
the unit. 

 

In a thunderstorm, the unit should be turned off to avoid damage due to lighting. 

 

If the air conditioner is knocked over during use, turn off the unit and unplug it from the main power 
supply immediately. Visually inspect the unit to ensure there is no damage. If you suspect the unit 
has been damaged, contact a technician or customer service for assistance. 

 

Notes on fluorinated gases 

 

This air conditioning unit is a sealed unit containing a fluorinated gas. For information 

on  the  specific  gas  types  and  quantities,  see  the  relevant  label  on  the  device  or 

specification. This product does not support user adding refrigerant themselves.   

 

Maintenance or repair of this device must be performed by a certified technician. 

 

Product recycling must be performed in accordance with local regulation. 

 

 

 

Summary of Contents for Mate 2
















Reviews: