Eelink TK115, User Manual

Page: 18 / 24

18
Note: You need to set vibration sensitivity and time,
there are arm / disarm switch.
8.2 Collision / Falling Alarm(only B
type)
Conditions: There is a Vehicle Collision or it’s falling
down.
8.3 Speed Alarm
Conditions: When the vehicle over and below the
set speed.
Note: You need to set the low speed limit and high
speed limit.
8.4 Geo-fence Alarm
Conditions: when the vehicle entry / exit / across
the Geo-fence.
Note: You need to set the conditions of crossing
fence, fence types and so on.
Note: When above alarm occurs,terminal will send
alarm to service platform, meanwhile send a SMS
message to the device administrator number if the
number is set up.
Note: 8.1 and 8.2 is the alarm for B type(add
acceleration sensor component); 8.3 and 8.4 alarm
parameters must be set before work, Please refer
to the 《 Operation Commands 》