Eelectron Web Server IN00M02WEB
Box content
HORIZONE MINI Box contains:
Web server HORIZONE MINI
Power supply connector
KNX bus connector
Connections
To use HORIZONE MINI
, it’s necessary to
fix the following connections:
Power
supply
12/24VDC
(240mA
12VDC
through a special connector
provided
in
accordance
with
instructions on the device (PIN 1 and 2
starting from the left, + and -,
respectively)
Bus KNX using WAGO connector
LAN network with ethernet cat.5 cable
(not supplied)
HORIZONE MINI è designed to fit with 5
modules DIN rail.
FIRST LOGIN
Connect HORIZONE MINI to your PC using
a Ethernet crossover cable.
Open network settings panel of your
PC, following the instructions of your
OS
Change the settings of TCP / IP
communication protocol (version 4) on
the LAN port that is connected to
HORIZONE MINI, and manually set the
following parameters:
o
IP Address: 192.168.0.100
o
Subnet mask: 255.255.255.0
o
Default gateway: 192.168.0.110
Save and wait for the new settings to take
effect. When requested, restart the OS.
After committing the changes, open a
browser typing the following address:
http://192.168.0.110
After few seconds, the system will show the
login form, enter the following credentials:
Username:
admin
Password:
admin
N.B. We recommend using the following
browsers for better compatibility:
Google Chrome
Apple Safari
CHANGE NETWORK CONFIGURATION
If
the
HORIZONE
MINI
network
configuration is not suited to the LAN where
will be installed, follow these steps:
Click on the Configuration icon in the
lower toolbar
From Menu select “
Setup
” and then
“
Network
”
Insert the new settings for the
HORIZONE
MINI
network
configuration and confirm pressing
the SAVE button
KNX CONFIGURATION
For more details, please refer to the
INSTALLER MANUAL downloaded from
the
website
www.eelectron.com
("download"
area).
HARDWARE SPECIFICATION
Supply
12 … 24VDC
Power
consumption
180mA @12V ; 110mA @24V
Communication
ports
KNX Standard bus connector red/black
RS232 (1x) 9 pin D-SUB male
connector
RS485 (1x) Screw connector
USB 2.0 (2x)
LAN (1x)
RJ-45 jack (10/100 Mbps)
Reset
Push button on the bottom of the case
LED
Red (1x) Reset in progress/alarms
Green (1x) Power ON
Protective class
IP20 (according to EN 60529)
Insulation Class
II (according to EN 60335-1)
Operating
temperature
0°C … +50°C
Dimension
88x90x62 mm ; 5 DIN modules
Enclosure
material
Thermoplastic self-extinguishing
material
DISPOSAL
The crossed-out bin symbol on the equipment or packaging means
the product must not be included with other general waste at the end
of its working life. The user must take the worn product to a sorted
waste centre, or return it to the retailer when purchasing a new one.
An efficient sorted waste collection of the environmentally friendly
disposal of the used device, or its subsequent recycling, helps avoid
the potential negative effects on t
he environment and people’s health,
and encourages the re-use and/or recycling of the construction
materials.
Eelectron spa
Via Monteverdi 6
I-20025 Legnano (MI) - Italia
Tel: +39 0331 500802 Fax: +39 0331 564826
Email: [email protected] Web:
www.eelectron.com
R
e
v
. 1
.1
S
u
b
je
c
t t
o
c
h
a
n
g
e
s
w
ith
o
u
t n
o
tic
e
