manualshive.com logo in svg

Eela Audio Logos, Manual

Share
Download
Eela Audio Logos Manual Download Page 19

Manual Logos

EELA AUDIO  Parmentierweg 3                  

19                                          

Rev. 6

 (July 2001)

5657 EH  Eindhoven, the Netherlands

Main v1.43

6.4 Insert bypass

The function key F1 will switch the bypass of the insert
point and therefore disables the Insert.
The <F1> LED will indicate the ON- status.
(The insertion is disabled).
For more information about the Insertion point, see
Chapter 2 (Rearside connectors).

6.5 Compressor / Limiter

<F1> toggles the Compressor / Limiter active or not. The LED in the <F1> key indicates the
active On status. Turning the JOG-wheel will adjust the Threshold (max. microphone output
level).

The Attack-time can be adjusted by holding the <F2> key and turning the JOG-wheel at the
same time for Slow / Medium / Fast. Be careful selecting the FAST response time, this can
result in a pumping effect.
The 4 LED's next to the microphone fader indicate the level of gain reduction.

6.6 Ducker

Ducker is a talk-over function to reduce the level of other
sources while talking into the microphone. The <F1> key
activates the function On and Off. The LED in the <F1>
key indicates the active on- status. This indication is only
visible if the DUCKER-menu is selected in the display.
Turning the JOG-wheel will adjust the threshold level
( -6, -12, -18 en -24dB).

The attack-time can be adjusted by holding the <F2> key and turning the JOG-wheel at the
same time for Slow / Medium / Fast.
While holding the <F3> key and turning the JOG-wheel will adjust the gain reduction of the
other sources for 3, 6, 12 of 18dB.

Gain reduction

7 dB
5 dB
3 dB
1 dB

Bypass

CompLim

Summary of Contents for Logos




























Reviews:

No comments

Brands by name

Popular brands

Load more brands