EA 946 MODULATION GUARD VERSION 2.10; INSTRUCTIONS FOR USE
EELA AUDIO Parmentierweg 3 5657 EH EINDHOVEN THE NETHERLANDS
Page 15
REMOTE CONTROL BY MEANS OF THE TELEPHONE DIAL PAD:
The control commands are existing of a figure (DTMF tone) and have to be preceded
by a '*'. The layout and the functions are as follows;
•
* 1 monitoring studio.
* 3 monitoring AUX source.
•
* 4 Transmitter line routed to studio.
* 6 Transmitter line routed to AUX
source.
•
* 7 Start AUX source.
* 9 Stop AUX source.
•
* # Break the connection and reset of EA946 when remotely is determined that error
is corrected.
•
* 0 Break the connection without reset of EA946; Reset then has to be perfomed
manual in the studio after error is corrected.
EXAMPLE: The AUX source can be monitored by pressing '* 3' and then, if necessary the
AUX source can be started with '* 7' and/or stopped with '* 9'. The studiosignal can be
monitored by pressing '* 1'. After checking the available audio sources, you can select the
source feeding the transmitter. By pressing '* 4' the signal coming from the studio is routed
to the transmitter and by pressing '* 6' the AUX-source is routed to the transmitter. After it
has been determined what is the best signal to be transmitted, you can disconnect in 2
different ways: e.g by pressing ‘* #’ or pressing ‘* 0’. By pressing ‘* #’ this will reset the
EA946, the line will be disconnected and the unit will resume its guarding function. The line
can also be disconnected by pressing ‘* 0’ in which case the EA946 wil not reset but will stay
e.g. routed to the AUX source and waiting for a manual reset after the error is corrected.
