CONNECTOR PANEL:
All connections to and from the mixing desk are concentrated on the back. The main analogue and
digital audio connections are balanced on XLR-type connectors. The connections for monitoring and
AUX 6 – 10 are stereo, unbalanced on 6,3 mm jack.
Connections:
All connections to and from the mixing desk are “industry standard”:
Inputs:
Microphone, AES/EBU balanced
XLR female
Pin 1 gnd; pin2 +; pin3 –
Line inputs, balanced L and R
XLR female
Pin 1 gnd; pin2 +; pin3 –
Outputs:
Main analog outputs L and R balanced
XLR male
Pin 1 gnd; pin2 +; pin3 –
Main digital AES/EBU outputs balanced
XLR male
Pin 1 gnd; pin2 +; pin3 –
Aux 6..10 unbalanced
6,3 mm jack
Tip left; ring right; sleeve gnd
Monitor loudspeaker unbalanced
6,3 mm jack
Tip left; ring right; sleeve gnd
Headphones
6,3 mm jack
Tip left; ring right; sleeve gnd
TB1 and TB2
6,3 mm jack line inputs to connect an amplified TalkBack microphone or
interfacing with 3
rd
party intercom systems.
LAN RJ45 connector for future use
D25 multipin connectors for general purpose input and output switches
DBUS RJ45 connector for expansion units like:
The EA963, a 19” 1U A rack unit with and additional 2 x 8 GPI/O contacts as well as 4 solid state AC
relays for switching lamps.
USB standard connector to connect to a computer for firmware updates and control by automation
software like CAPS2.
8 balanced microphone inputs with individually switched 48 Volt phantom powering.
8 AES/EBU balanced digital inputs with sample rate converters
range: 22kHz.> 200 kHz
16 balanced analogue inputs.
8 balanced analogue outputs, 2 main outputs, 1 record output, 5 aux.
8 AES/EBU outputs 48 kHz sample rate
5 unbalanced aux outputs
Loudspeaker headphones output unbalanced
External monitor inputs, Talkback inputs unbalanced on 6,3 mm jack
MIO connector
,
future or 3
th
party expansion for multichannel USB audio or network audio
Eela Audio D4 manual
4
