Lexi Setup and Testing
If you did not indicate interest in Lexi at the purchase of your encoder, please contact EEG technical support at
516-293-7472 to obtain the necessary iCap and Lexi / EEG Cloud credentials. Also, be sure your AV650 is properly
set up on your network prior to setting up Lexi (instructions on Page 3).
Please note that an iCap account IS required for your AV650 to communicate with Lexi over a standard
broadband connection.
1. Confirm iCap Connectivity and Know Your iCap Access Code:
✔
From the main page of the AV650 web interface, confirm the iCap Status says Connected to remote
server. If inactive, contact EEG support for credentials.
✔
Your iCap Access Code can be found in the shipping documentation provided with your Encoder. This
will be used in the next step to enable Lexi to access live program audio from, and return automatic
captions to, your encoder over iCap.
Figure 6: Active iCap Status on Encoder’s Web Interface Main Page
2. Configure Lexi on Your Encoder
✔
Select the Lexi module from the left hand menu of the web interface. Enter your EEG Cloud
Username and Password along with your encoder’s Access Code. If this information has not been
pre-configured prior to shipment, noted in the paperwork that came with your encoder, or provided to
you via e-mail by EEG Support contact us at 516-293-7472 to setup your Lexi account and obtain this
information.
13
Copyright © 2021 EEG Enterprises, Inc.
All Rights Reserved.
