CC1260 iCap™ Interface Card
3.3
Web Configuration
The Web Configuration interface enables you to access configurations
for your CC1260 applications from any computer on your local network.
Several web applications are installed at the factory: a Startup Setting
editor, a web-based serial-emulation Terminal for entering Smart En-
coder commands, system date/time configuration, and configuration of
iCap™ settings.
Once you have configured your CC1260’s network settings in DashBoard
and connected it to your LAN via the port on the rear module, you can
open up a web browser on any PC on the same local network. Navi-
gate to the IP address that you configured in DashBoard; for example,
type 192.168.1.15 into the address bar of the browser if that is the ad-
dress you entered into DashBoard. If you cannot navigate to the page
in your web browser, check with your network administrator that the IP
Address and Subnet Mask you entered in DashBoard are valid parame-
ters for your network, since individual settings vary.
Once the page has loaded, you will see a list on the left panel of the
different web applications installed on your encoder. Click any of these
links to navigate to the page for that application.
12
