Assembly Instruction
STEP 1
IMPORTANT
Do not tighten up all the screws until each part is properly assembled. You should keep Key Wrench in a safe place as you
may need to tighten up the Head Cap Bolts in the future.
Turn Top (A) upside down and
place it on a soft cloth.
Remove the drawer.
STEP 3
Turn the unit over to its’ upright position.
Slide the drawer into position
Remove the Pull Handle that is installed
on the inside of drawer and re-install
it on the outside of the drawer (see Figure 2).
.
Figure 2
Flat Washer
Spring Washer
Bolt
Key Wrench
Figure 1
Bolt
Spring Washer
Flat Washer
E
E
C
B
D
D
D
A
F
F
Wood Screw
A
STEP 2
Attach Legs (B), (C) and (D) to Top (A) with Flat
Washers, Spring Washers and Bolts, then tighten
the bolts half way (see Figure 1).
Attach Stretcher (E) and (F) to the unit with
Wood Screws.
Tighten up all bolts.
