Spring Washer
Flat Washer
Bolt
STEP 1
Assembly Instructions 2/3
A
F
E
B
Attach Top (A) with (B), by aligning dowels
with the holes and firmly pushing together.
Engage the locks by turning their handles clockwise ¼ turn (see Figure 1).
Attach Table Slide (E) to the unit using Bolts (short), Spring Washers and Flat Washers.
Attach Table Slide (F) in the same manner.
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in the safe place as you may need to tighten up
the Bolts in the future.
(Figure 1)
(Figure 2)
Flat Washer
Spring Washer
Bolt
Key Wrench
D
D
D
D
Attach Legs (D) to the unit with Flat Washers, Spring Washers
and Bolts (long) (see Figure 2).
STEP 2
