7
If it displays with a message of “Battery Level = 255(0xFF)”, it implies that the
Bell is at low battery status. Please replace the batteries as soon as
possible.
2. Z-Wave’s Groups (Association Command Class Version 2)
Door Bell can be set to send reports to associated Z-Wave devices. It supports
one association group with 5 nodes.
2-1 ASSOCIATION_GET
ASSOCIATION_GET Command
[Command Class Association, Association Get]
: enquire Door Bell about
relevant information of Grouping 1.
ASSOCIATION_REPORT Command
[Command Class Association, Association Report]
: report relevant
information of Grouping 1.
ASSOCIATION_GROUPING_GET Command
[Command Class Association, Association Grouping Get]
: enquire how
many Groupings can be supported by the Door Bell.
ASSOCIATION_GROUPING_REPORT Command
[Command Class Association, Association Grouping Report]
: report
Door Bell can support 1 Grouping.
2-2 ASSOCIATION_SET
ASSOCIATION_SET Command
[Command Class Association, Association Set]
: decide which note
is/nodes are to be placed in Grouping 1.
2-4 ASSOCIATION_REMOVE (V2)
ASSOCIATION_REMOVE (V2) Command
[Command Class Association, Association Remove]
: decide which note
is/nodes are to be excluded from Grouping 1 of Door Bell.
Note:
1. If the Door Bell is changing playing status (e.g. from NOT playing to playing), the
Door Bell will report its status (SENSOR_BINARY_REPORT) to nodes of
Grouping 1.
2. If battery level of Door Bell drops to an unacceptable level, the Door Bell will emit
BATTERY_REPORT “Battery Level = 255 (0xFF)” to the nodes of Grouping 1.
3. Command
Class
The Door Bell supports Command Classes including…
* COMMAND_CLASS_BASIC
* COMMAND_CLASS_VERSION
* COMMAND_CLASS_BATTERY
* COMMAND_CLASS_SWTICH_BINARY
* COMMAND_CLASS_SENSOR_BINARY
* COMMAND_CLASS_ASSOCIATION_V2
* COMMAND_CLASS_MANUFACTURER_SPECIFIC
Troubleshooting
Device Symptom Possible
Cause
Recommendation
Run out of battery power
or does not fit batteries
1. Replace a new battery
2. Refit the battery with
correct polarity
Button or LED is
damaged
Push Button
LED indicator is
not working after
Button is
pressed
The device is not
working
Call to the local service for
repair
Run out of battery power
or does not fit batteries
1. Replace a new battery
2. Refit the battery with
correct polarity
Bell doesn’t
sound after
Music Selector is
pressed
The button is damaged
Call to the local service for
repair
The user hasn’t logged
in to the Administrator
Log in to Administrator to
execute the program
Door Bell
Door Bell.exe
cannot be
executed
Being blocked by
antivirus software or
firewall
Close the firewall or
antivirus software
Specifications
Model No.
Item
TAC06-JOEL Push Button
Battery
1.5V AAA size x 2
Range
Up to 30 m line of sight
Frequency Range
868.42 MHz
