© Edwards Limited 2010. All rights reserved.
Page 31
Edwards and the Edwards logo are trademarks of Edwards Limited.
Storage and disposal
A746-02-885 Issue A
6
Storage and disposal
6.1
Storage
Use the following procedure to store the pump:
Close the vacuum system isolation valve to prevent suckback into the vacuum system. Switch off the pump using the
on/off switch on the motor. Disconnect the pump from the electrical supply. Purge your vacuum system and the pump
with dry nitrogen and disconnect the pump from your vacuum system. Place and secure protective covers over the
inlet and outlet ports.
Store the pump in cool, dry conditions until required for use.
6.2
Disposal
Dispose of the pump and any components from it safely in accordance with all local and national safety and
environmental requirements. Particular care must be taken with components which have been contaminated with
dangerous process substances.
Do not incinerate fluoroelastomer seals and O-rings.
