A540-55-880 Issue D
Page 52
© Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Appendix A1
Each sub menu is described below.
A1.4.4
COMMANDS menu
Under the Setup menu. Scroll by pressing up/down keys. Press
ENTER
to open a sub menu or
CANCEL
to exit back to
the
SETUP
menu.
Press the up/down keys to select the new settings and press
ENTER
to accept or
CANCEL
to exit back to the
COMMANDS
menu.
A1.4.5
INV FAULT HIST (Display Inverter Fault History) menu
Under the Setup menu. Scroll by pressing up/down keys. Press
ENTER
to open a sub menu or
CANCEL
to exit back to
the
Setup
menu.
Each inverter fault history contains up to 32 entries, each contains one alarm and one warning, where 1 is the most
recent. Scroll by pressing up/down keys. Press
CANCEL
to exit back to the Inverter Fault History menu.
The inverter fault information is displayed in the following format:
DP Inv Fault nn
A:aaaa W:wwww
where nn is the number, aaaa is the alarm code, and wwww is the warning code.
for more information about inverter warnings and alarms.
A1.4.6
SOFTWARE VERSION Display menu
Under the Setup menu. Scroll through the software version loaded in the processors by pressing up/down keys. Press
CANCEL
to exit back to the
SETUP
menu.
Edit Display attributes menu
Display Attr…
Set Time and Date
†
Set Clock…
Display Pump Type
Show Pump type...
*
This option requires a security code to access it.
†
Time is set automatically when connected to a Fabworks network.
Table A6 - COMMANDS menu
Gate Valve (Open/Shut)
*
*
This option requires a security code to access it.
MB Pump (On/Off)
†
†
The PDT must be in control to perform these functions.
PB Pump (On/Off)
Green Mode State (On/Off)
Table A7 - INV FAULT HIST (Display Inverter Fault History) menu
DP Inv Fault Hist (Dry Pump Inverter Fault History)
MB Inv Fault Hist (Booster Inverter Fault History)
Table A5 - SETUP menu
Description
Display
