Edwards Signaling Genesis WG4, Installation Sheet

Page: 3 / 4

P/N 3102000- EN • REV 002 • ISS 16MAR18 3 / 4
Wiring
See Figure 4. Connect all wiring in accordance with national electrical
codes and applicable local requirements.
Caution: Equipment hazard. To avoid equipment damage, ensure that
the signal voltage does not exceed the volta ge rating of the device.
Figure 4: Wiring diagram
(1) Horn- strobe I N −
(2) Horn- strobe I N +
(3) Marking indicates the signal polarity
required to activate the device
(4) Horn- strobe OUT −
(5) Horn- strobe OUT +
(6) Not used
Figure 5: UL 1971 minimum light output (% of rating vs. angle)
(1) Angle
(2) Percentage of rated output
Note: Horizontal plot
Maintenance
Do not change the factory finish.
Perform a visual inspection and an operational test twice a year, or as
directed by the local authority having jurisdiction.
This unit is not serviceable or repairable. Should the unit fail to
operate, contact the supplier for replacement.
Specifications
Operating voltage
Horn- strobe 24 VDC, 24 VFWR nominal
Dimensions (W × H × D) 5.6 × 8.5 × 1.4 in. (142 × 216 × 36 mm)
Sound level output See Table 4, Table 5, Table 6 , and
Table 7
Horn tone 3.2 kHz
Strobe operating current See Table 11
Light output See Table 8, Table 9 , Table 10, and
Figure 5
Wire size 12 to 18 AWG (0.75 to 2.50 mm²)
Compatible electrical box
Outdoor
Indoor
Model 449
4 in. square by 1.5 in. deep box
Operating environment
Temperature
Relative humidity
−40 to 151°F (−40 to 66°C)
0 to 95% noncondensing
Table 4: Sound level output (dBA), per UL 464
Volume Setting
16V 24V 33V
Continuous High 89.7 94.7 97.4
Continuous Low 85.4 89.5 92.5
Temporal High 84.2 90.5 93.5
Temporal Low 81.7 85.4 88.1
dBA = Decibels, A -weighted
UL 464: Sound level output measured in a reverberant room at 10 ft.
(3.05 m)
Table 5: Sound level output (dBA), per CAN/ULC-S525
Volume setting
16V 24V 33V
Continuous High 94.0 99.6 102.9
Continuous Low 92.8 97.2 98.6
Temporal High 96.5 100.5 104.2
Temporal Low 90.3 94.2 97.0
dBA = Decibels, A -weighted.
CAN/ULC - S525: Sound level output measured in an anechoic room at
10ft (3.05m).
Table 6: Directional sound characteristics (horizontal pattern), per
CAN/ULC-S525
Angle (°) [1]
Sound output (dBA)
90 (Ref) 0 (Ref)
60 and 115 − 3
45 and 132 −6
[1] Angles are measured from a perpendicular axis; positive angles to
the right.
(4)
(5)
(6)
(1)
(2)
(3)
100
9
5
9
0 85 80 75 70
6
5
6
0 55 50 45 40 35 30 25 20 15 10 5 0 5 10 15 20 25 30 35 40 45 50 55
6
0
6
5 70 75 80 85
9
0
9
5
100
0 5 10 15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
-85
-90
firealarmresources.com