Securing and unlocking seat harness
Securing harness:
1. Place your child in the seat. Make sure that your child’s back and
bottom are flat against the seat. This will maximise comfort and
allow the harness to properly secure your child.
2. Position the height of harness according to your child’s height.
The harness straps should be level with their shoulders.
3. To fit the harness, link the two right hand fittings together and
then
CLICK!
into the buckle. Do the same for the two left hand
fittings. Check that the buckle is secure by pulling the buckle.
There should be a strong connection.
Unlocking harness:
1. To remove the harness, press the large button on the front of the
buckle until it releases (as pictured below).
12
designed in NZ
Shoulder strap height
There are three height slot positions for the shoulder straps. As
your child grows, you will need to move the straps according to your
child’s height.
IMPORTANT
- The shoulder straps should be positioned so that
they sit level with your child’s shoulders. Do not use if the child’s
shoulders are above the highest slots in the backrest or if the child’s
weight exceeds 20kg.
Summary of Contents for Oscar 3-Wheeler
Page 16: ...edwardsandcobaby com...
