Edwards & Co Capsule 2 Series Instruction Manual Download Page 18

Page: 18 / 20

Caring for your car seat

Important information

•

NEVER

lubricate or oil any part of the seat.

•

Only use mild detergents.

•

Wipe clean the seat shell, harness and EPS foam lining inside

only.

•

NEVER

use solvents, harsh detergents or washing up liquids as

these may damage the harness and seat.

•

NEVER

wring any fabrics.

•

Dry thoroughly before storage.

•

Store in a well-ventilated area, away from direct sunlight which

could damage or fade your car seat.

•

Store in a safe place when it is not being used. Avoid placing

heavy objects on top of it.

•

NEVER

allow the seat to come into contact with corrosive sub-

stances such as battery acid or petroleum products.

Cleaning the fabric cover:

•

Hand wash in warm water only.

•

NEVER

tumble dry.

To remove the cover from the car seat:

1. Remove the harness by gently feeding it through from the front

to the back of the seat.

2. Remove the crotch strap, including buckle, by rotating it a

quarter turn and feeding it out through the seat shell. The cover

should now be free of obstruction.

3. Remove the cover and hand wash it at about 30ºC; dry flat away

from direct heat.

4. To replace repeat the instructions above in reverse.

WARNING

– ensure the harness is correctly fitted. Please follow the

‘Adjusting the shoulder belt height’ section for more information on

harness fitting. If you are unsure please contact Edwards & Co.

Summary of Contents for Capsule 2 Series





















Search results

Summary of Contents for Capsule 2 Series

Reviews:

Related manuals for Capsule 2 Series

Brands by name

Popular brands

Edwards & Co Capsule 2 Series, Instruction Manual

Search results

Summary of Contents for Capsule 2 Series

Reviews:

Related manuals for Capsule 2 Series

Brands by name

Popular brands