AVERY BASE UNIT - USE + CARE GUIDE
22
Alternative Belt Locking Device
If the length of vehicle belt doesn’t allow for
the vehicle belt locking device to be positioned
alongside the belt buckle, you may use a metal
H Clip to lock the belt. If necessary, contact
your local child restraint technician for more
information regarding the use of an H Clip.
Position the H Clip on the vehicle belt to ensure it
sits directly in the middle of the belt path guides
on the base unit as illustrated.
When the H clip is in position, ensure the capsule clips securely into all
four of the base unit’s connection points and can be correctly and safely
connected and removed without interference.
Belt Buckle Length
If the seat belt buckle stalk is too long to enable a secure installation, it
can be twisted up to three times to shorten it.
WARNING:
When installing the base unit with the vehicle belt, it can
only be installed using 3-point static or retractable vehicle belts.
WARNING:
If installing your base unit using the 3-point seat belt,
you must always stow the ISOFIX connectors in their storage position.
WARNING:
Ensure there are no twists in the vehicle belt. If the belt
is twisted, reinstall the base unit.
WARNING:
Only install the base unit on a forward-facing vehicle
passenger seat.
WARNING:
An incorrectly installed child restraint can cause death
or injury. If you are unsure, please contact Edwards & Co or talk to your
local child restraint technician, found via the Waka Kotahi NZTA website
-