Educational Insights Circuit Explorer Rover, Mission Manual, Page: 8 / 28

8
2 X
3X AAA 3X AAA
3X AAA
P2 P1
P4
1
1
2
2 1
2
P3
DOES
NOT
OPEN!
Battery Installation
and Instructions
1. Use a Phillips-head screwdriver to remove the
battery door screws.
2. Battery packs require three AAA batteries
each, not included.
3. Batteries must be inserted with the
correct polarity.
4. Do not mix old and new batteries.
5. Do not recharge non-rechargeable batteries.
6. Do not mix different types of batteries:
alkaline, standard (carbon zinc), or
rechargeable batteries.
7. Only use batteries of the same or
equivalent type.
8. Remove exhausted batteries from the units.
9. Do not short-circuit the supply terminals.
10. Only charge rechargeable batteries under
adult supervision.
11. Remove rechargeable batteries from the toy
before charging.
12. This toy is not to be connected to more than
the recommended number of power supplies.
To prevent corrosion and possible damage to the
product, it is recommended to remove the batteries
from the units if they will not be used for more than
two weeks.