4
Resident PC software and browser based application
can be downloaded for free at
well as a full software user guide.
Note:
Make sure not to download and install both
types of software they will conflict on the computer.
Procedure:
1.
Install the Edu-Logger software
2.
Connect the 900-213 module to the PC or Mac
3.
Connect the salinity sensor to the 900-213
module (they directly plug together). Please note
there is no calibration required for this sensor.
4.
Open the Edu-Logger software.
5.
Once a salinity sensor logo appears on the left
side of the screen the probe has been
automatically identified and you can begin
experimentation.
6.
If the salinity sensor is not automatically
identified, click on the “Search for sensors” icon
to find the sensor.
7.
Select the “On-line experiment” button; this will
open a graph below.
8.
Click on the “Module setup” button located on
the salinity sensor icon in the module window to
change the sensor settings if need be.
9.
Click on the "experiment set up" button to change
the experiment settings if need be (experiment
duration for example).
10.
The salinity sensor will give a live reading in the
box to the left of the screen while plugged in.
11.
To run an experiment and collect data click “Run
experiment”.
12.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
