12
Restoring sensor’s factory default settings:
Procedure:
1.
Connect the 900-213 to a PC, Mac, tablet, or
smart device.
2.
Connect the photo gate sensor to a 900-213
module (they directly plug together). Please note
there is no calibration required for this sensor.
3.
Open the Edu-logger software.
4.
Click the “Tools” icon.
5.
Click the “Restore sensor’s factory defaults” on
the enu.
6.
If prompted to clear the graph, click either the
“Off-line experiment” or “On-line experiment”
(whichever you are using).
7.
Click “Clear experiment results”.
8.
Resume from step 4.
