Changing Tip
1. IMPORTANT:
Make sure your tool is cool.
2.
Turn Retaining Sleeve counter-clockwise to remove.
3.
Remove old Soldering Tip.
4.
Insert new Tip.
5.
Install Retaining Sleeve. (should be “finger” tight only)
WARNING:
Do not use the soldering tool if soldering tip is loose. This will cause the heater element to break.
LT375
LONER Spade Soldering Tip
.06”
(1.5mm)
.48”
(12.2mm)
LT376
LONER Spade Soldering Tip
.12”
(3.0mm)
.48”
(12.2mm)
LT374
LONER Conical Soldering Tip
.03”
(0.8mm)
.48”
(12.2mm)
LT382
LONER Conical Soldering Tip
.02”
(0.5mm)
.62”
(15.8mm)
XP371
LONER Extra Performance Spade Soldering Tip
.03”
(0.8mm)
.60”
(15.2mm)
XP375
LONER Extra Performance Spade Soldering Tip
High Temperature Rated for Lead Free Process
.06”
(1.5mm)
.60”
(15.2mm)
XP376
LONER Extra Performance Spade Soldering Tip
High Temperature Rated for Lead Free Process
.12”
(3.0mm)
.60”
(15.2mm)
XP374
LONER Extra Performance Conical Soldering Tip
.03”
(0.8mm)
.60”
(15.2mm)
XP429
LONER Extra Performance Conical Soldering Tip
.02”
(0.5mm)
.77”
(19.3mm)
Soldering Tips
Iron Plated for long life-Nickel and Chrome Plated for optimum heat transfer
Contact Edsyn for more tip selections
Length B
Set-Up Required for Spade, Conical, and Extra Performance Tips
OPTIONAL:
Apply
AN112 Anti-Seize Compound or
AN122 High Heat Anti-Seize Syringe Dispenser
to Heater and area of Tip contact.
SR574
High Performance
Hollow Heater
Spade Tip
Conical Tip
More Tips are available at our website (www.edsyn.com) or in our General Line Catalog.
Width A
