WiDRIVE User’s Guide
77
Create the encryption keys depending on the type of
encryption you choose. 64bit-hex keys require 10 char-
acters, where as 128-bit keys require 26 characters. A
hex key is defined as a number between 0 through 9
and letter between A through F.
Click on the Save button to confirm the changes and
then click on the OK button on the Success dialog to
return to the pervious window. The countdown timer
will start at 50 secs once these changes have been ap-
plied.
3.4.4 Infrastructure Network Setup
Click on the AP Profile panel on the Control Panel.
Select Obtain IP From AP or enter static IP address
based on your network plan.
Enter the IP address of the device. When Mode is set
to Obtain IP From AP, this field is read-only and reports
the device’s current IP address.
Enter the subnet mask for the IP address. When Mode
is set to Obtain IP From AP, this field is read-only and
reports the device’s current subnet mask.
Enter SSID, select WEP Encryption to be 64 bits or 128
bits depending on your wireless router/AP setting. En-
ter the exact same KEY that your used for the wireless
router/AP. Save the settings to complete the change of
the wireless router SSID. The new settings have no im-
mediate effect until you either reboot WiDRIVE or press
“Apply” to save and automatically restart WiDRIVE.
3.4.5 Maintenance
Click on the Maintenance panel on the Control Panel.
3.4.5.1
Firmware Upgrade
Click on the Browse button and then select the appro-
priate firmware and then click on the Upload button.
Make sure that downloaded the appropriate firmware
from your vendor.
3.4.5.2
Application Upload
Click on the Browse button and then select the appro-
priate application and then click on the Upload button.
3.4.5.3
Language Pack Upload
Click on the Browse button and then select the language
to add and then click on the Upload button.
3.4.5.4
Hard Drive Format
You’ll format (only 1 partition: 100% of the hard drive)
or split the hard drive (50:50, 25:75 or 75:25) in place of
the list of the partitions. You may need to wait for some
minutes as it takes time to format the hard drive.
CAUTION: This operation will completely erase all data
stored on the HDD.
3.4.5.5
Hard Drive Repair
Click the Repair button. This will start the process of
verifying and repairing, if necessary, the hard drive vol-
ume.
