Assemble two (2) post with one (1)
double
brace (see fig-
ure A). Skipping one slot from the bottom of the post,
place the rivets into post with the shelf ledge facing up (see
figure B). Tap lightly to seat rivets. Repeat with two (2)
post and one (1)
double
brace. Assemble the two (2) post
end units with two (2)
double
beams (see figure C). Skip
one slot from the bottom of post, tap lightly to seat rivets.
Assembly Instructions for UR361860
Assembly Instructions for UR361860
Assembly Instructions for UR361860
Start by adding a woodboard shelf to the level previously
built, then continue working by adding the second level
using two (2)
single
beams and two (2)
single
braces in
the post slots of your desired location. Again place the
rivets of the beams and braces into the post slot with the
shelf ledge facing up and tap lightly to seat the rivets.
IMPORTANT NOTE : Make sure all rivets are fully seated into the post slots.
IMPORTANT NOTE : Make sure all rivets are fully seated into the post slots.
IMPORTANT NOTE : Make sure all rivets are fully seated into the post slots.
Step
1
Step
2
Step
3
Step
4
Figure A
Brace
Post
Woodboard Shelf
Beam
Figure C
Top Post
Figure D
Post Coupler
Add a woodboard shelf to the previously built level, then
assemble the top post to the bottom post by using four (4)
of the post couplers. Place the couplers into the top of the
bottom post, and the bottom of the top post and tap down
to properly seat (see figure D). Continue by adding the
third level of
single
beams and
single
braces just above
the post couplers. Again tap lightly to seat the rivets.
Add a woodboard shelf to the previously built level, then continue
by adding the final level to the unit using two (2)
double
beams
and (2)
double
braces. Tap lightly to properly seat the rivets and
add the final woodboard shelf to the top of the unit. Install all four
(4) end caps to the top of the unit after assembly has been com-
pleted (see figure E). Install end caps to post by pressing down
on end cap at the three points illustrated above (see figure F).
Bottom Post
Woodboard Shelf
Figure B
Shelf Ledge
Tap Lightly
Note:
Post are
directional.
The slot
must point
down.
Post Slot Points Down
Note:
Post are
directional.
The slot
must point
down.
Top Of Unit
Figure E
Press Down
Figure F
