Installing the SwitchAir
1.
A The channels attach to the inside of
the rack using cage nuts and screws.
The front side channels use the top
and bottom holes for their attachment.
The rear channels are supported by the
stabilising tabs that attached to the air
trunk. When the air trunk is inserted into
place the stabilising tabs slide into the
channels.
2.
Insert Air Trunk between channels on
top of network switch. The stabilising
tabs slide into the opening on each
channel. Secure the air trunk to the rack
using cage nuts and screws.
3.
Attach Wipers to chassis using provided
pan head screws.
4.
Slide Chassis into channels and attach
to rack using customer provided cage
nuts and screws.
Ver: EDPSA2004IG1118.1
ü
www.edpeurope.com
Å
+44 (0)1376 510337
