Installing the SwitchAir
1.
Install air channel to rack front using customer provided cage nuts and screws. Use the outside holes
on the channel to attach the channel to the rack. The inner holes will be used by the chassis attaching
to the rack. The rear of the channel doesn’t attach to the rack or switch.
2.
Attach the wiper to the chassis using the two ea. 6-32 1/4 “pan head screws. The wiper helps
channelise the cool air from the chassis to the switch intake fans.
3.
Slide chassis into channel and attach to the front of the rack using customer provided cage nuts and
screws. Install customer provided power cable to power distribution unit.
Ver: EDPSA2003IG1118.1
ü
www.edpeurope.com
Å
+44 (0)1376 510337