Transmitter - Wall-Mounted Remote Control
Ref : EM
July 2009
page 8
EM
Dimmer/Position function:
1. Hold the ON or OFF button pressed to dim or bright.
2. Press the UP or DOWN button shortly to place in position the shutter.
Zone function:
Installation diagram for centralized shutter control. (RMV
receiver)
EM transmitter for
centralised master control
Place at the door entrance
RMV Receivers located
on the first floor
RMV Receivers located
on the ground floor
EM Transmitter to
control the first
floor as a group
EM Transmitter to
control the ground
floor as a group
Receivers do not respond to wall switch command?
- Check and/or change the battery if necessary.
- Check the radio signals transceiver RPT, RMA, RMV, TM13 or SC28 security
console is powered on.
Tips
- Knowledge base available on
www.ebodeelectronics.eu.
