-
4
-
Paper Jams and overload protection:
Cross-Cut shredder X7CD is equipped with a motor overload protection device. The
normal short duty cycle for continuous shredding at maximum capacity is 2 minutes.
The power may terminate automatically in case of the following abnormal situations:
1. Operating the shredder at the maximum capacity continuously for a prolonged
period of time, e.g. More than 2 minutes for computer paper and CD/DVD or credit
card without stopping.
2. Exceeding the shredding capacity e.g. inserting more than ten (7) sheets at one
pass, or if the paper is not fed squarely into the feed opening.
Both abnormal operations may result in the activation of the automatic motor overload
protection, which terminates the power to the unit .If this occurs, you should:
1. Unplug the power cord from the AC outlet to allow shredder to cool down. Tear or
cut off any excess paper from the top of the shredder.
2. Plug the power cord back into the AC outlet and place the Switch in
REV
. Pull the
remaining paper out of the cutters. Place the Switch back to the Auto position if
necessary clear the feed opening of any remaining shredded pieces of paper, Keep
fingers away from feed opening to avoid harm.
3. With the Main Switch in the
AUTO
position and the feed opening clear, you are now
ready to resume normal shredding.
Specifications:
Shred type:
Cross cut
Shred Size:
4x45 mm
Shredding Capacity:
7 Sheets or 1pc CD/DVD, or 1pc credit card
Feed Opening:
220mm for paper
Feed Opening for CD/DVDs:
120mm
Input: 220-240
VAC,
50HZ
Shredding speed:
2.3m/min (7 sheets)
Basket capacity:
15 L
