Ednet 87230, User Manual

Page: 3 / 25

Getting started
3. Power on/Power off

Position the device in the vehicle using the suction
mount and press the Power button to turn it on. To
power off the device press the button again.

You can also connect the device to the car charger.
It will automatically turn on and start recording when the
car engine starts. When the engine stops, the device will
automatically save the last file and turn off.
4. Language Setting
To switch to other languages you need to do following
steps to change the menu to your language:

Press function button 4 (Menu/back)

Scroll down to page 5/7 and select “Sprache”

Choose your language and press “OK”(Function button 7)
5. Charging

Using the power cable: connect the device to the USB
port of a computer/Laptop

Using the car changer: Connect the device to the car
charger. The device will start charging after the car
engine is turned on. The device will automatically turn on
and start recording. When the engine stops, the device
will automatically save the last file and turn off.

Normally it takes approximately 2-3 hours to fully charge
the device. Operating the device while charging with the
Car Charger may extend the time of full charge.