Edmund Optics Autocollimator, Step-By-Step Instructions, Page: 22 / 23

PROPRIETARY - Property of Edmund Optics, Inc. | 2012 Copyright© Edmund Optics, Inc.
18. Attach the two 30mm Cage Port
Cover Disks (#85-627) to the two
open faces of the sphere using M3
SHCS.
19. Thread the 10mm Cage Extension
Tube (#85-518) to the bottom of the
beamsplitter mount. Then attach the
25mm Cage Blank Disk (#85-539).
20. Slide the 150mm Cage Cover Tube
onto the cage rails. Lock into place
with M3 SHCS.
21. The Mounting Post (#83-143) can
be attached to the 30mm Cage plate
holding the Source Arm. The Post
Holder (#58-972), once attached to
a breadboard or bench plate can
support the entire assembly.
LIGHT BAFFLING & MOUNTING
22