EDM 33945 Instruction Manual Download Page 9

REF. 

33945

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS

- Place the fan on a flat and dry surface.
- Before connecting the device to the network, make sure that the switch is in the "0" position.
- Plug the power cord into the 220 / 240V - 50Hz AC outlet.
- Through the 3-speed system you can start the fan, this system is designed to give you maximum flexibility. 
You can also activate the oscillation function by means of the oscillation switch.

 

POSITION 0: OFF position

 

POSITION 1: first speed

 

POSITION 2: second speed

 

POSITION 3: third speed

 

OSCILLATION: oscillation button / fix direction (num.9)

- If you do not use the fan for a long time, unplug the cord from the electrical outlet.
- Never try to disassemble the device from the engine.
- If you notice any anomaly (such as unusual fan noise), turn off the device and unplug it immediately.
- Make sure that no objects or liquids enter the inside of the fan through the openings in your box.
- The fan should only be used in dry environments.
- Protect the device from dust, moisture, sunlight and direct heat.

CLEANING AND MAINTENANCE

 Make sure that the appliance is switched off before cleaning it.
- Clean with a soft damp cloth, without detergent, aggressive liquids or solvents.
- Do not immerse the fan in water or any other liquid.
- If the fan is not going to be used for a long period of time, clean and protect it and keep it in a dry place.

FEATURES

- Power: 45W
- Speeds: 3 levels
- Fixed or Oscillating Position
- Security grille
- Diameter of the blades: 40cm
- Heights: min.100 - max.120cm

PARTS OF THE FAN 

1. Grid clamping ring
2. Front of the grid
3. Fixer of the propeller
4. Helix
5. Grid bra
6. Back of the grid
7. Motor
8. Control panel
9. Rotation regulator
10. Fixing screw
11. Telescopic top tube (chromed)
12. Fixing ring
13. Telescopic bottom tube (white)
14. Cover
15. Base

ASSEMBLY INSTRUCTIONS FOR THE BASE AND THE BODY

1. Remove all packaging carefully, avoid scratching the plastic covers with scissors or knives.
2. Mount the base.
3. Fix the base of the telescopic bottom tube with the screws.
4. Stretch the upper telescopic tube inside the tube and fix it with the ring.
5. Put the base of the rear cover of the motor and then use a nut to hold it.
6. Place the propeller on the front axle of the engine and then use the nut to secure it.
7. To finish, cover with the front protection using the clamping ring and close it with the screw.
8. Next, insert the completed fan body into the inner tube. And finally, use the nut to fix the body fastener 
with the ventialdor.

OPERATION OF THE FAN

9

Summary of Contents for 33945














Reviews: